IP (Immunoprecipitation)
(Figure 5. Immunoprecipitating PLS3 in Hela whole cell lysate .Western blot analysis of PLS3 using anti-PLS3 antibody (AAA127215).Lane 1: Hela whole cell lysates (30ug)Lane 2: Rabbit control IgG instead of anti-PLS3 antibody in Hela whole cell lysate.Lane 3: anti-PLS3 antibody (2ug) + Hela whole cell lysate (500ug)After electrophoresis, proteins were transferred to a membrane. Then the membrane was incubated with rabbit anti-PLS3 antigen affinity purified polyclonal antibody (AAA127215) at a dilution of 0.5ug/mL and probed with a goat anti-rabbit IgG-HRP secondary antibody . The signal is developed using ECL Plus Western Blotting Substrate . A specific band was detected for PLS3 at approximately 71 kDa. The expected band size for PLS3 is at 71 kDa.)
Rabbit PLS3 Polyclonal Antibody | anti-PLS3 antibody
Anti-PLS3 Antibody Picoband
IP (Immunoprecipitation)
(Figure 5. Immunoprecipitating PLS3 in Hela whole cell lysate .Western blot analysis of PLS3 using anti-PLS3 antibody (AAA127215).Lane 1: Hela whole cell lysates (30ug)Lane 2: Rabbit control IgG instead of anti-PLS3 antibody in Hela whole cell lysate.Lane 3: anti-PLS3 antibody (2ug) + Hela whole cell lysate (500ug)After electrophoresis, proteins were transferred to a membrane. Then the membrane was incubated with rabbit anti-PLS3 antigen affinity purified polyclonal antibody (AAA127215) at a dilution of 0.5ug/mL and probed with a goat anti-rabbit IgG-HRP secondary antibody . The signal is developed using ECL Plus Western Blotting Substrate . A specific band was detected for PLS3 at approximately 71 kDa. The expected band size for PLS3 is at 71 kDa.)
IP (Immunoprecipitation)
(Figure 5. Immunoprecipitating PLS3 in Hela whole cell lysate .Western blot analysis of PLS3 using anti-PLS3 antibody (AAA127215).Lane 1: Hela whole cell lysates (30ug)Lane 2: Rabbit control IgG instead of anti-PLS3 antibody in Hela whole cell lysate.Lane 3: anti-PLS3 antibody (2ug) + Hela whole cell lysate (500ug)After electrophoresis, proteins were transferred to a membrane. Then the membrane was incubated with rabbit anti-PLS3 antigen affinity purified polyclonal antibody (AAA127215) at a dilution of 0.5ug/mL and probed with a goat anti-rabbit IgG-HRP secondary antibody . The signal is developed using ECL Plus Western Blotting Substrate . A specific band was detected for PLS3 at approximately 71 kDa. The expected band size for PLS3 is at 71 kDa.)
WB (Western Blot)
(Figure 4. Western blot analysis of PLS3 using anti-PLS3 antibody (AAA127215).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel)/90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30 ug of sample under reducing conditions.Lane 1: human Hela whole cell lysates,Lane 2: human A549 whole cell lysates,Lane 3: human SiHa whole cell lysates,Lane 4: human PC-3 whole cell lysates,Lane 5: mouse pancreas tissue lysates.After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-PLS3 antigen affinity purified polyclonal antibody (AAA127215) at 0.25ug/mL overnight at 4 degree C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-DyLight 647 Conjugated secondary antibody at a dilution of 1:2000 for 1.5 hour at RT. A specific band was detected for PLS3 at approximately 71 kDa. The expected band size for PLS3 is at 71 kDa.)
WB (Western Blot)
(Figure 4. Western blot analysis of PLS3 using anti-PLS3 antibody (AAA127215).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel)/90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30 ug of sample under reducing conditions.Lane 1: human Hela whole cell lysates,Lane 2: human A549 whole cell lysates,Lane 3: human SiHa whole cell lysates,Lane 4: human PC-3 whole cell lysates,Lane 5: mouse pancreas tissue lysates.After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-PLS3 antigen affinity purified polyclonal antibody (AAA127215) at 0.25ug/mL overnight at 4 degree C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-DyLight 647 Conjugated secondary antibody at a dilution of 1:2000 for 1.5 hour at RT. A specific band was detected for PLS3 at approximately 71 kDa. The expected band size for PLS3 is at 71 kDa.)
FCM/FACS (Flow Cytometry)
(Figure 3. Flow Cytometry analysis of PC-3 cells using anti-PLS3 antibody (AAA127215).Overlay histogram showing PC-3 cells stained with AAA127215 (Blue line). To facilitate intracellular staining, cells were fixed with 4% paraformaldehyde and permeabilized with permeabilization buffer. The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-PLS3 Antibody (AAA127215, 1ug/1x106 cells) for 30 min at 20 degree C. DyLight488 conjugated goat anti-rabbit IgG was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1ug/1x106) used under the same conditions. Unlabelled sample without incubation with primary antibody and secondary antibody (Red line) was used as a blank control.)
FCM/FACS (Flow Cytometry)
(Figure 3. Flow Cytometry analysis of PC-3 cells using anti-PLS3 antibody (AAA127215).Overlay histogram showing PC-3 cells stained with AAA127215 (Blue line). To facilitate intracellular staining, cells were fixed with 4% paraformaldehyde and permeabilized with permeabilization buffer. The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-PLS3 Antibody (AAA127215, 1ug/1x106 cells) for 30 min at 20 degree C. DyLight488 conjugated goat anti-rabbit IgG was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1ug/1x106) used under the same conditions. Unlabelled sample without incubation with primary antibody and secondary antibody (Red line) was used as a blank control.)
IF (Immunofluorescence)
(Figure 2. IF analysis of PLS3 using anti-PLS3 antibody (AAA127215).PLS3 was detected in an immunocytochemical section of A549 cells. Enzyme antigen retrieval was performed using IHC enzyme antigen retrieval reagent for 15 mins. The cells were blocked with 10% goat serum. And then incubated with 5ug/mL rabbit anti-PLS3 Antibody (AAA127215) overnight at 4 degree C. DyLight488 Conjugated Goat Anti-Rabbit IgG was used as secondary antibody at 1:500 dilution and incubated for 30 minutes at 37 degree C. The section was counterstained with DAPI. Visualize using a fluorescence microscope and filter sets appropriate for the label used.)
IF (Immunofluorescence)
(Figure 2. IF analysis of PLS3 using anti-PLS3 antibody (AAA127215).PLS3 was detected in an immunocytochemical section of A549 cells. Enzyme antigen retrieval was performed using IHC enzyme antigen retrieval reagent for 15 mins. The cells were blocked with 10% goat serum. And then incubated with 5ug/mL rabbit anti-PLS3 Antibody (AAA127215) overnight at 4 degree C. DyLight488 Conjugated Goat Anti-Rabbit IgG was used as secondary antibody at 1:500 dilution and incubated for 30 minutes at 37 degree C. The section was counterstained with DAPI. Visualize using a fluorescence microscope and filter sets appropriate for the label used.)
WB (Western Blot)
(Figure 1. Western blot analysis of PLS3 using anti-PLS3 antibody (AAA127215).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel)/90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30 ug of sample under reducing conditions.Lane 1: human Hela whole cell lysates,Lane 2: human A549 whole cell lysates,Lane 3: human Siha whole cell lysates,Lane 4: human PC-3 whole cell lysates,Lane 5: rat stomach tissue lysates,Lane 6: rat kidney tissue lysates,Lane 7: mouse stomach tissue lysates,Lane 8: mouse kidney tissue lysates.After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-PLS3 antigen affinity purified polyclonal antibody (#AAA127215) at 0.25ug/mL overnight at 4 degree C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit with Tanon 5200 system. A specific band was detected for PLS3 at approximately 71 kDa. The expected band size for PLS3 is at 71,69,66 kDa.)
WB (Western Blot)
(Figure 1. Western blot analysis of PLS3 using anti-PLS3 antibody (AAA127215).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel)/90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30 ug of sample under reducing conditions.Lane 1: human Hela whole cell lysates,Lane 2: human A549 whole cell lysates,Lane 3: human Siha whole cell lysates,Lane 4: human PC-3 whole cell lysates,Lane 5: rat stomach tissue lysates,Lane 6: rat kidney tissue lysates,Lane 7: mouse stomach tissue lysates,Lane 8: mouse kidney tissue lysates.After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-PLS3 antigen affinity purified polyclonal antibody (#AAA127215) at 0.25ug/mL overnight at 4 degree C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit with Tanon 5200 system. A specific band was detected for PLS3 at approximately 71 kDa. The expected band size for PLS3 is at 71,69,66 kDa.)
NCBI and Uniprot Product Information
Similar Products
Product Notes
The PLS3 pls3 (Catalog #AAA127215) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The Anti-PLS3 Antibody Picoband reacts with Human, Mouse, Rat and may cross-react with other species as described in the data sheet. AAA Biotech's PLS3 can be used in a range of immunoassay formats including, but not limited to, WB (Western Blot), IF (Immunofluorescence), ICC (Immunocytochemistry), IP (Immunoprecipitation), FCM/FACS (Flow Cytometry), ELISA. Researchers should empirically determine the suitability of the PLS3 pls3 for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "PLS3, Polyclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.Precautions
All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.Disclaimer
Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.Item has been added to Shopping Cart
If you are ready to order, navigate to Shopping Cart and get ready to checkout.